Trouble Maker Bowls II

 Well, here's that beast ready for turning. It's mounted

on the lathe after the glue has dried. Now the fun begins.

 I say fun because the bowl gauge makes a lot of noise

as it rounds out all of those corners.

 This is pretty much the final shape above. It semi-mimics

the shape of the "Trouble Maker Bowls".

 I will now get rid of the "Tail Stock" so I can turn the inside.

The tail stock is that gray piece on the right. It with the help

of a piece of wood inside the bowl, keep everything steady

while turning the outside. There will be no such help for

turning the inside of the bowl.

The inside turning is no less noisy than turning the

outside of the bowl. I take it slow and careful because

those corners can be unforgiving. A sharp tool and a

steady hand are required.

Here's a straight on shot. Next time I'll show

you the finished project.